Topic

Revolutionary water treatment system, 6000 liters

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedSep 26, 2009 at 4:46 pm

http://www.ted.com/talks/michael_pritchard_invents_a_water_filter.html

filters 6000 liters, nano technology, takes EVERYTHING out, completely sterilizes.

15 nanometer filtration, charcoal element, etc.

SIX TONS of clean water with 1 cartridge, currently being used by special forces and the military around the globe.

Weight is 22oz. This is the only downside, but with the 6000 liter ability, i may overlook this. I will make necessary changes to other aspects of my gear to makeup for it. My current filtration setup is around 9oz: 2 Platypus + hose + frontier pro + micropur tables + cut scoop platypus + extra 2 liter platy to chemically treat multiple liters at once so i dont have to wait 4 hours for 2 liters of water.

So if i go with this now i will increase my weight 13oz, but i will incur a 150 cost (as much as i have probably spent on different filter setups over the years).

I would like to see someone buy one of these and see how low they can get the weight by sanding, cutting and shaving off unnecessary aspects of the device.

PostedSep 26, 2009 at 5:05 pm

IF i got this i would go through all my gear and lighten up ALOT to makeup for it. I would cut all my tags off, lose the luxuries, lose the pot lid, Switch to a wood burning stove (dont have to carry fuel), lighten the medical kit, and ditch unneccessary stuff sacks, among other things, to makeup the weight. I would need to makeup 13oz as of right now.

PostedSep 26, 2009 at 5:30 pm

Well, nano tubes look to be a good solution for water PURIFICATION, as opposed to 2 micron filtration.

But – and here's the rub – we all know how easy it is to clog a 2 micron filter like the Katadyn PUR filter so how much faster will a nano tube filter clog? And how easy are they to unclog?

Eric

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...