Topic

Stoves-101 question

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedSep 23, 2009 at 3:53 pm

With a remote-canister stove (MSR WindPro to be specific), can you or should you tighten the windguard so it is super-snug to the pot, or should there be an inch or so gap between the windguard & the pot, at the top of the windguard?

PostedSep 23, 2009 at 4:54 pm

Normally with a windscreen you want a gap of 1/4 – 1/2 inch. You want enough of a gap that the heat can flow up and heat the sides of the pot, but not so much of a gap that the heat escapes quickly. If your gap is too tight then the stove might have a hard time getting enough oxygen. I'm not familiar with your stove, just saying what's typically for stoves.

Roger Caffin BPL Member
PostedSep 23, 2009 at 5:46 pm

A good half inch would be my minimum. Up to an inch seems OK to me.

cheers

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...