For a 8×10 tarp, does the ridgeline run along the 8' or the 10' axis?
Topic
ridgeline and tarp orientation
Become a member to post in the forums.
- This topic is empty.
Depends on the context. If you're looking at a finished tarp, the ridgeline is wherever the ridgeline is. Cheapass tarps will generally have the ridgeline along the 8' axis (Equinox). Better tarps will have the ridgeline along the 10' axis (typically all the "cottage industry" companies build em right). Some have it going diagonal (Kelty). If you're building a tarp, I'd recommend the 10' axis for your ridgeline because that's the logical ridgeline for most A-frame pitching.
Thank you.
Odd, the three Equinox tarps I've owned/used are all oriented along the longer axis… and they've all worked great for years. The seam is centered along the "ridgeline" on the long axis, even on my Equinox tarps.
The ultimate location of the ridgeline does depend on how you're setting up. Are you doing an A-frame kind of pitch, more of a lean-to, etc?
My bad. I forgot to mention that the Equinox tarp I used which gave me the impression they had an 8' ridgeline was an older one, maybe even sold through Campmor (or if Campmor didn't always use Equinox for the tarps they sell, maybe I'm altogether wrong about it being Equinox). Looks like they've updated their designs since that was made.
Most fabrics come 60" wide bolts. So, if I want an 8 x 10 tarp, I buy 16' and cut it into two 8' sections which I then sew together along the 8' sides. The seam or ridgeline is now down the center of an 8' long 10' wide tarp. That is why most tarps have the ridgeline down the middle.
For tarps with seams on the diagonal, great for hammocks, goto Jacks R Better.
I recently bought an Equinox tarp with the shorter seam from Campmor. It's one of the urethane coated nylon ones with the grommets. I think the short seam makes the tarp cheaper. It's actually appropriate for me because I like the half pyramid setup where the stress is on the shorter length. However one thing to note is that there is no center grommet on the long side (it would go through the seam if there was) which isn't so good. So I have to use a grip clip for my main guyline.
Become a member to post in the forums.

