Topic

? about the Brunton Crux

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
Bill Fornshell BPL Member
PostedMar 1, 2006 at 2:47 pm

I have a Crux and it is connected to a small Snow Peak at this time. It works fine and should work with any standard canister.

PostedMar 1, 2006 at 2:56 pm

Great, thank you. I just got the Snow Peak Mini cookset and of course my current fuel can won’t fit.

Bill Fornshell BPL Member
PostedMar 1, 2006 at 3:33 pm

“my current fuel can won’t fit.”

What kind of Fuel can is it? If it has the standard screw fitting it should work.

PostedMar 1, 2006 at 6:00 pm

Sorry, I meant my current fuel canister won’t physically fit into the new Snow Peak pot.

-jeff

Bill Fornshell BPL Member
PostedMar 1, 2006 at 7:11 pm

I use a Snow Peak 700ml cup/pot and the small Snow Peak gas canister will fit in it. If you have a 600ml cup the small Snow Peak canister might fit if you turn it upside down.

Michael Martin BPL Member
PostedMar 1, 2006 at 9:15 pm

The small snowpeak canister does indeed fit upside-down into their 600ml cup. But, it’s a tight fit. I drilled a hole near the top of the cup to break the vacuum seal. And, I tie a loop of spectra cord around the canister to form a pull-loop to remove it. A giga stove also fits in the cup if you remove the igniter. If I recall, the crux was even more compact than the giga, so it *should* fit in there as well.

Cheers,

-Mike

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...