Topic

New Inferno stove from Trail Designs!

  • This topic is empty.
Viewing 16 posts - 1 through 16 (of 16 total)
PostedAug 23, 2009 at 1:27 pm

Nice review. I have also used this new Ti-Tri system, and have run it side by side with a bushbuddy. They both boiled water in ~ the same time. The Ti-Tri inferno was easier to feed as it could take larger diameter of wood (I was using a 2L cone, so larger opening). The Ti-Tri is also nicer to sit around and use as a camp fire as you can really load it up, whereas the BB needs constant feeding of small bits of wood. As the review points out, there is not a great advantage to using the insert (compared to a standard Ti-Tri) in terms of boil time, but it is a cleaner burning system as you get complete combustion. It is so clever it's scary!!!

PostedAug 23, 2009 at 3:40 pm

It's not on their website. I dunno if they are planning on mass-producing it or not….

John Roan BPL Member
PostedAug 23, 2009 at 3:45 pm

They haven't "productized" it yet, but I think they are working on it. Shoot them an email…I'm sure they would be happy to help you out. They custom make all of these, for a very reasonable price.

PostedAug 23, 2009 at 4:01 pm

I would think, though, that the more people express interest, the more likely they'll decide to add it to the site!

Rand Lindsly BPL Member
PostedAug 24, 2009 at 12:56 am

Hi! Thanks for all the kind words!

John is right….we haven't "productized" it yet…..and by that we mean that there isn't any documentation, instructions, pretty pictures, pricing strategy, etc etc etc. Until we get all that in place, we probably won't be putting it up on our website. However, if you would like to participate in our increasingly popular word of mouth "early adopters" program, drop me an email and we can get something headed your way.

Thanks again!

Rand :-)
rand AT traildesigns DOT com

Hendrik Morkel BPL Member
PostedSep 18, 2009 at 2:40 am

I decided to take Rand by his word and signed up for the “Early Adopters” programme (though I need to say, aren’t we UL folks all Early Adopters? What would Geoffrey Moore say?). Last Monday the package arrived, and yesterday and today I was out playing with it. I made a video of it, which you can see here.

In short: Excellent craftsmanship, awesome speed (1l water boiling in 7,5 minutes!), easy feeding, very stable. If I wouldn’t need the Caddy for transport, it would be super lightweight for the output, its 157 g for Ti-Tri, Inferno, Fireplate, stakes (that’s for a Tibetan Titanium 1100 pot, smaller pot = smaller cone = less weight). Add the Caddy with 75 g for that. I like the multi-usability of it, the possibility to use Esbit, Alcohol and wood in one set up is splendid though I would only carry one option (Esbit or Alcohol) as back-up with me in the wild. Finally, the communications with Rand are very fast and friendly, excellent customer service like I said in my blog. I am looking forward to play more with it soon =)

Rog Tallbloke BPL Member
PostedSep 18, 2009 at 3:30 am

Henrik, excellent video review, very clear and well presented.

The system is very efficient. I wonder if the widening angle of the fire cone helps reflect radiative heat into the woodgas driven off from the fuel to get such a strong updraught and clean burn.

Hendrik Morkel BPL Member
PostedSep 18, 2009 at 8:00 am

Thank you Rog! First time I did a video, so there is room to improve!

As you said, a very efficient system – concerning your pondering, this is what Rand explained me: The inside cone is upside down, because when the fire first burns, it does not completely combust, as there are still un-burned gases coming off it. The inner cone being upside down, it connects, "seals", against the outer cone which allows more fresh air to travel up between the cones, which then enters the burning chamber through the upper vents – this creates a afterburn.

A very efficient system, even if I do not completely understand the physical and engineering behind it. But its amazing how clean it burns, I threw in surely three full hands of wood, and it produced a very minimal left over. Fascinating stuff!

todd BPL Member
PostedSep 18, 2009 at 10:34 am

I received mine recently, too. Can't wait to fire it up!

I second the great communication from TD!

John Roan BPL Member
PostedSep 18, 2009 at 10:39 am

Hendrik, very nice job on the video.

I have had my inferno out in the field a couple of times now – all with the same good results.

Next up…MYOG inferno for Heineken pot for a total of around 3oz. I'll be testing it this weekend while camping in Mt. Charleston. More to come…

John

PostedSep 18, 2009 at 6:29 pm

Thanks Hendrik, now I understand much better how the new combination works. Here in the mountains of the American west it's often very dry and wood fires are usually forbidden in summer so I use ESBIT. With your setup I could use either, depending upon conditions. Looks like a good winter stove as well.

I nearly bought a Bush Buddy but this combo appears to be just as efficient in wood combustion, easier to feed and have more versatility for fuel types.

Eric

PostedSep 18, 2009 at 6:58 pm

Hendrick
Great video. Very easy to see how everything works from that vision. Thanks for that.
Franco

Eric
Same here…

Hendrik Morkel BPL Member
PostedSep 19, 2009 at 12:05 am

John, if you wouldn't have posted that great review I wouldn't have known about the Inferno, so a huge thanks to you!

Eric and Franco, thank you for the appraisal =) Now that I think about it, the Inferno probably must be a top stove for the winter, because of the fast boiling times (thinking about melting snow) and the likely more stable set-up. But winter's still three months off, so then I can see again.

Viewing 16 posts - 1 through 16 (of 16 total)
Loading...