Topic

JMT Gear Issues

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
PostedJul 20, 2009 at 1:12 pm

Stakes, Poles, Shoes, and a NOT Sweaty Back

I just completed a JMT, 11 day, South to North trip. It was a great trip. No rain. No wind. Easy stream crossings. Only a little snow on the passes. There were a lot of mosquitoes. Nighttime low temps were from 32° to 52°.

I took a MLD SpeedTarp and a MYOG bug bivy for shelter, a Fosters Cone for freezer bag cooking, and a ULA Ohm. All performed quite well. This was my first extended trip with the Ohm, and even starting out with 25#, it was a pleasure to use.

I did have a few problems with other gear. Four Ti Goat Carbon stakes failed in the first two days. I lost the aluminum tips from two the first night, broke the heads on two more the second night, and also pulled the head off of one the following morning. I think it is a QA issue, as this is my second batch, and the first batch is still going strong, with no failures to date. Lesson Learned: Test all gear before heading out, regardless of history or confidence.

Stake Failures

My second gear failure was entirely my doing. During a stream crossing I made a “desperation stab” with my Ti Goat AGP, saved my body, and gear, but broke the tip off of the pole. The tip was unrecoverable. Fortunately I had enough of a lower section to keep pole useable. I added four tight wraps of Leukotape to the fractured end and hoped for the best. The pole provided five more days of service, although without a spike it did slip at times. Still, quite amazing to me that fractured CF and a little tape could take the continued abuse.

AGP Stub

When I returned home I tried to replace the lower section with that of a spare pole I had bought here at BPL. To my dismay I discovered the spare’s threaded post for the expander had severely rusted over the winter months.

AGP Thread Rust2

With a lot of work I was able remove the expander, clean up the threads, and get things serviceable again. Lesson Learned: Check those serviceable parts, even if they aren’t supposed to rust. But be cautious with oils – some will destroy the rubber-like expander. (Don’t ask me how I know…)

The third surprise was the fragility of my Inov8 330 shoes. Sierra granite is razor sharp. Fail to lift a foot high enough and you can peel the toe caps right off these shoes.

330 Toe Caps

I spent some time at MTR with some hiker box SeamGrip and Duct Tape to re-furbish the left. The right shoe (on the left in the photos) didn’t shred until after MTR, and gives a good idea of what to expect.

I was also surprised at how quickly the soles where shredded. Look closely at the central gray spine and you will see missing lugs. More dismaying is that virtually all of the “performance” layer is gone. You can see a few scraps still attached, but they contribute nothing to traction. I believe this was the cause of my stream-crossing slip mentioned above. Typically these shoes stick to anything. Wet or dry. Loose or solid. I have found them to have amazing traction. But after 100 miles that reliability was eroded away. Lesson Learned: Be sure the gear can do the miles.

330 Tread

Last, in an earlier Thread I asked if Ultralight packs implied a wet back due to a waterproof fabric in direct contact with ones back. I am a sweat hog, and literally drench my shirt and shorts within minutes of starting a hard climb. Well, I found an easy solution: Mountain Equipment Coop’s Seamless Short-Sleeved Crew (#5012-131). It has a very long body and by leaving the tail of the T outside my shorts in the back the wicking fabric acted as a diverter and an evaporator that kept my short (and my butt) dry. Lesson Learned: Keep looking – there is a solution.

All in all an excellent trip.

Chris Morgan BPL Member
PostedJul 20, 2009 at 1:17 pm

Thanks Greg.

My trip is coming up in a week, and this is some helpful advice.

My Sun Dragons are going to die, but they're so gosh darn comfortable.

Did you do 25 lbs for 11 days without resupply? If so I'm really impressed.

PostedJul 20, 2009 at 1:25 pm

I resupplied at Muir Trail Ranch (at 100 miles)

I carried 6.5 days of food at the start, but got to MTR a half a day early, so could have carried less — if I had known, and if everything always goes well….

Ryan Teale BPL Member
PostedJul 20, 2009 at 1:33 pm

Thanks for the report!

Would love to hear more about the OHM and how it carried a canister. I plan on taking this pack on my JMT hike in August but don't have a canister around to see how it will all pack up. What did you use for back padding? What canister did you use?

M G BPL Member
PostedJul 20, 2009 at 1:49 pm

Interesting report. Planning on taking the same shoes for my late September southbound trip.

More details on food, food packing/canister use/choice in the Ohm, would be great.

More pictures would be interesting as well

PostedJul 20, 2009 at 1:56 pm

Ryan –
I used a Wild Ideas Bearikade Weekender for a canister. Nine inches in diameter and 10" tall, 650 cubic inches.

To see how your food will fit, look in the kitchen for a stock pot with similar dimensions, and then practice. All my food was in 'not quite sealed' baggies so the air could be squashed out.

My Caldera Cone for a Fosters can did not fit until I had eaten 2.5 days of food, so I hung it and my alcohol in a distant tree. (PITA)

For back padding in the Ohm I use a closed cell foam pad that was 0.5 x 19 x 40, folded in thirds.

I was very careful to locate the canister firm against the pad and then pack the Front of the pack with clothing to keep the canister close to my back. Then to pack the sides. Also — by packing clothing around the canister you will minimize pack damage from the canister cutting though fabric if (when) you (inadvertantly) lean the pack against a rock.

I was very pleased with how well the Ohm carried, even with the canister holding so much weight 10" from my back.

PostedJul 20, 2009 at 2:04 pm

Christopher: "My Sun Dragons are going to die, but they're so gosh darn comfortable."

Take a small tube of SeamGrip, in a ZipLock.
Clean the spot with alcohol.
Rebuild and let set for as long as possible.

SeamGrip will become part of my kit.
I nearly lost the game in November when 50% of the stitching on my last pair of 330's blew while in the GC.

Hoping your shoes will 'make it' is laudable.
Walking out with no soles is pretty tough.

Scott Bentz BPL Member
PostedJul 20, 2009 at 2:35 pm

What type of canister did you take? I'm taking a Bearicade Weekender in August for a 14 day trip with a re-supply at Vermillion and at Muir.

Thanks for the update.

Scott

Sorry, did not see above post about the weekender.

Chris Morgan BPL Member
PostedOct 5, 2009 at 3:35 pm

So my Sun Dragons didn't quite make it for the entire JMT. Good thing we had dental floss and duct tape…

j

Viewing 10 posts - 1 through 10 (of 10 total)
Loading...