Dec 18, 2005 at 6:00 am #1217381
彼のBLOG と 要約です
１１７*６８ ３１ｇ、上の穴6.5Φ*３２、下の穴8Φ*８ （ｍｍ）
※アメリカで入手する方法を検索中です JSBJSBDec 18, 2005 at 6:09 am #1347139Dec 24, 2005 at 12:31 am #1347444Dec 24, 2005 at 3:27 pm #1347449
thanks to Google translatesDec 24, 2005 at 4:36 pm #1347453
@bfornshellLocale: Southern Texas
I have been following several Japanese Blog’s on this topic since it was first posted last week. Sometime over the next couple of days I will rewrite Yukio’s comments and post them. The computer traslation is only English – sort of. One thing we have to understand about some of the words they use – they have a lot of fun doing this.
For Ryan and others selling gear, they talk/write a lot about US products on their Blog’s and seem to buy a lot of light weight gear from here – BPL.com – and other light weight gear makers.
For now try this:
” The turbo – “, the one person of the friend of same taste of the JSB is
Him with beautiful technique to alcoholic
You remodelled (boring the hole on the side).
Micro size (150cc capacity)
The entire て of the stove, the stand and wind prevention with one somatotype, could surprise us.
That BLOG and summary is
The fact that you remodel just bores the hole on the side.
117 * 68 31g, hole 6.5 above Phi * 32, hole 8 under Phi * 8 (mm)
Putting ESBIT 1, on the aluminum foil, it ignites.
The aluminum can which directly poured the water of the 150cc is put. It boils in 2 minute 40 seconds.
Originally with the OUTDOOR, warming the Japanese sake, in order to be able to drink tastily, it was developed.
When the button is pushed in, it is the mechanism where the lime and the water blend and become feverish.
Reversing, it diverts the top and bottom to the stove.
* The method of procuring in America is in the midst of searching the JSBJSB
Edited by JSBJSB at 12/18/2005 07:04:12 MST.
(JSBJSB) The ON 12/18/2005 which adds SUBJECT illustration 07:09:11 MST
Illustration is added
Edited by JSBJSB at 12/21/2005 08:31:19 MST.
(JSBJSB) SUBJECT 200cc Chimney stove ON 12/24/2005 01:31:25 MST
” The turbo – ” having an influence on the work,
Those which are increased in quantity in 200cc capacity were made.
140mm & 68mm 41g
Annealing also the inside bottom, after making soft, it is processed convexly.
The liquid alcohol, it corresponds to the ESBIT and the TRIOXANE et cetera.
It is unskillful processing the inhalation hole, but cyclone it burns, (laughing)
The adhesive used the GM-3500.
Edited by JSBJSB at 12/24/2005 01:51:17 MST.
You must be logged in to reply to this topic.