Topic

Is anyone planning on buying a 2009 ULA Conduit?

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
Jeff Jeff BPL Member
PostedDec 4, 2008 at 10:26 pm

If so, could you grab some photos of the top closure system? It used to be a cool roll top, but now it went to a drawcord, probably like the old P1/P2.
The photos on the ULA site are never that great.

PostedDec 5, 2008 at 7:39 am

Not to hijack, but the old circuit uses a draw cord and I'm curious as to the changes in the 2009 circuit also.

It went in the opposite direction as the conduit with the circuit now using a roll top. So what's the difference? Does the roll top have two clips on each end as opposed to the drawcord closure which has one clip over the top?

PostedDec 5, 2008 at 8:03 am

Have the 2007 version of Conduit w/the rolltop w/the 2 clips to cinch down. If the new Conduit has the old P-1/2 type draw cord, myself would prefer the previous version at least to that, though like the weight savings and cost reduction of new Conduit. Have a Circuit incoming, so will stick w/what I have.

Brad Rogers BPL Member
PostedDec 5, 2008 at 8:17 am

Could you snap some shots of your Circuit when you get it? I am very interested in the Circuit with the Aluminum Stay.

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...