Topic

bush buddy and caldera cone

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
PostedAug 28, 2008 at 11:08 pm

any folks use a pot that works with both BB and cone??……. or……know if a GSI solo pot is similar enough in dimensions to a popular ti pot?
bit of a long shot that second question but it'd help if i could keep using the GSI pot i'm using now

thanks in advance if anyone can respond
baz

PostedAug 29, 2008 at 12:27 am

I have a Ti-Tri (Caldera Cone made of Ti w/ Ti floor) for a Snow Peak Trek 900. One also exists for a BPL SUL1100. Others may work too, but these are the only two that come to mind right now.

PostedAug 29, 2008 at 11:39 am

Even if you could find a cone to fit the BushBuddy/GSI, you wouldn't be able to feed the BushBuddy with a cone on. It would only work if you were contantly taking the pot + cone off to put more fuel in. Big hassle.

PostedAug 29, 2008 at 6:52 pm

duh…headslap!
your right allison.
thanks to you both for getting back to me.
i'd just like to improve windprotection for the BB when needed and improve performance of the supercat that i tend to use. my home made foil screens including the MYOG screen from the techniques section of BPL haven't lasted. (the foil tins i used/could find, weren't as thick as the ones BPL must have used)
I'd like to have the option of bringing both stoves in certain situations maybe even have the option to use the gram cracker.
what might you guys suggest for a windscreen for both?

PostedAug 29, 2008 at 8:49 pm

i just had a look again at the ti tri cone on traildesigns website and it looks like the slot on the cone for feeding a fire/pothandles might work with a bushbuddy. maybe it would provide enough space to feed a BB if pot is raised for fire mode ie sitting on top of the BB pot support. I haven't seen a cone or ti tri so i'm reaching here maybe…

anythoughts out there on whether this might be doable?

cheers

baz

Tim Marshall BPL Member
PostedAug 30, 2008 at 9:36 am

if you get the ti-tri cone get the optional floor plate (circle to keep from burning the ground) and leave the bush buddy at home. Why carry 6oz of redundant gear. The ti-tri is perfect for alcohol, esbit and wood (only use wood in the ti cones)

-Tim

PostedAug 31, 2008 at 11:37 am

tim do you know how the ti tri compares to the BB in terms of efficiency?
i like the BB because it uses very little fuel when you get used to using it. For me the BB has made wood burning justifiable while hiking.
baz

PostedAug 31, 2008 at 12:43 pm

Baz, If I were you I would shoot the guys at Trail Designs an emil and ask them for their recommendations. They know their cones better than anyone, and are good at thinking outside the square.

PostedAug 31, 2008 at 1:31 pm

cheers allison
i did email them a few days back…guessing they're busy. be good to hear what they think for sure.
i see your in NZ. lovely country, travelled and cycletoured there 4 yrs ago. so much to do in NZ and 'keas' (spelling?)to worry about instead of bears!! ha… i remember a kea taking a real interest in my tent while camping below avalanche glacier on the south island. good place to test gear NZ.
thanks again
baz

Roger Caffin BPL Member
PostedAug 31, 2008 at 2:23 pm

> what might you guys suggest for a windscreen for both?
Baking dishes are said to provide adequate foil. Failing that, have a look at the Trail Designs windshields. I have been using one for years, and there is a Spotlite review of it here at BPL.
http://www.backpackinglight.com/cgi-bin/backpackinglight/trail_designs_vari-vent_windshield-spotlight_review.html

Note that they do both the Vari-Vent and a plain one. The plain one is actually more robust and weighs the same.

Cheers

Viewing 10 posts - 1 through 10 (of 10 total)
Loading...