Topic

Should a canister stove spray a little fuel when it is unscrewed?

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
Steven Hall BPL Member
PostedNov 11, 2015 at 7:25 pm

I've been using an alcohol stove for a long time and just picked up a Soto OD-1R Micro Regulator Stove used off here for when I do shorter trips and want to do a little fancier cooking. I haven't used a canister stove in a long time so I don't know if this is normal but after I use it and I unscrew it from the canister at one point there is a little pop and some of the fuel sprays everywhere…is it supposed to do that or is something wrong with it? Thanks!

Jerry Adams BPL Member
PostedNov 11, 2015 at 8:38 pm

yeah, I have a Soto Windmaster that's the same I think insignificant amount of fuel lost when unscrewed. Weird popping noise. when I screw it on it also loses a bit of fuel. I think there's one spot that the valve is released but the o-ring not sealed, but I always quickly screw it past that point so insignificant amount of fuel lost.

PostedNov 11, 2015 at 9:45 pm

And take the stove off pointing up. Do it sideways or down, and sometimes you might lose a lot of fuel.

Nick Otis BPL Member
PostedNov 11, 2015 at 10:36 pm

Mine does that, too. I just unscrew quickly past that point.

Roger Caffin BPL Member
PostedNov 12, 2015 at 3:14 am

It happens. Thing is, if you keep the stove and canister upright, all you lose is a tiny bit of gas. Yeah – do it quickly! Cheers

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...