I have a cuben 'mid that is sewn together with a high degree of craftsmanship and forethought, especially with regard to water resistance. There are few (if any) reports of this cuben mid leaking during a storm even though it is not bonded or taped. I've done some testing with a garden hose and have been in one minor rainstorm with it and also have not had any issues. Still, I tend to err on the side of caution and I have tubes of seam grip and silnet, along with a few yards of 1" cuben tape.
Given this:
+should I seal it or tape it?
+should I do the outside, inside, or both? Tape is clear, mid is white
+if sealing would be the way to go, should I use the seam grip (PU) or silnet?
I've also thought about doing the sealing or taping about 2/3 the way down from the apex, since anything below that, that may leak in really heavy rain, won't drip on the outer.
