Topic

Packing the stakes for cook kit

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
Diane Pinkers BPL Member
PostedJul 2, 2015 at 9:50 pm

I am going to go on my first solo overnight. Instead of lugging my cook-kit for 2, I am going to take along a mini kit I have for emergencies, consisting of a Snow Peak 600 mug, a titanium lid and windscreen from Four Dog Stoves, and a Zelph Starlyte. The pot stand consists of 2 shortened titanium hook stakes that fit into grooves in the top of the wind-screen. Everything fits into the kit–except the stakes! Any suggestions on where people store stakes like that so they don't get lost? I like a tidy kit that is all together, and abandoned the stakes for my Sidewinder Caldera Cone for my big kit, preferring to use the Esbit setting for my pot without the stakes and take the hit in loss of fuel efficiency.

Maybe I'm too picky and shouldn't let this bug me. But it does! Everything needs to fit inside the mug, it is just that the stakes are a wee bit too long.

PostedJul 2, 2015 at 11:36 pm

We put stakes (for the Sidewinder ti-tri) together with a fork and a spoon which are of the similar length, and wrap the lot in a small cotton towel used for cooking prep. Unfortunately neither stakes nor cutlery fit inside our Evernew 1300 pot, otherwise we'd store these together.

PostedJul 3, 2015 at 3:41 am

I suppose it could also be handy to keep cooking stakes with your tarp/tent stakes. Normally shelter and stove are the first things to get unpacked, so it makes sense keeping those together.

Bob Moulder BPL Member
PostedJul 3, 2015 at 3:47 am

Would it work with the Four Dog windscreen if you used the Starlyte with the built-in pot support?

I've used this quite a few times with a Toaks 1350ml pot and a simple windscreen with good results. Gotta find a fairly flat spot and make doggone sure the pot is centered on the stove, but it works fine if care is taken. Should work easily with a 600ml mug, assuming the mug handles don't interfere with the windscreen.

PostedJul 3, 2015 at 6:48 am

If I ever need to carry stakes for use with my caldera cones I just pack them with my tent stakes. This way I know where they are and don't have to worry about stakes being in 2 different places, which makes it easier to keep up with them and I don't have to worry about punctures from stakes in 2 different places. My stakes go in a reinforced cuben fiber stake sack, which rides in the outer front pocket on my packs.

PostedJul 3, 2015 at 11:45 am

But make a small envelope of Tyvek for the stakes to keep the points from poking something.

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...