Glue/expoxy for carbon fiber tent pole sleeve insert thingy

Normally there are carbon fiber ferrules that are glued to the inside of the pole sections. If you can get the ferrule out, it would take only a drop of any kind of epoxy glue, spread thinly, and then get the thing pushed back into place.

If you can't get the ferrule out, then ask Zpacks. They probably have to answer that a lot.

–B.G.–

I've been able to get at it, so was surprised it had not moved when I was setting up last night. I should take a note book with, so I can check later, getting too old to try to remember stuff. My thinking was I only needed a little glue.
Duane

Any epoxy or superglue will work.

Cheers

Thank you Roger, forgot to go by the hardware store after work.
Duane