Topic

MYOG : UL Double layer Argon Camo Hammock for all you UL hammock people

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
Troy Ammons BPL Member
PostedMar 14, 2015 at 7:57 pm

Was going to do a double M50 until the Argon came out. Glad I waited.

1 oz camo argon outside.
.67 black Argon inside.

Channel ends.

12' long material and ended up at 11'-4" long by the material width less hem wide which is finished at about 4'-9" wide.

Suspension is the same as I had before on my 16 oz hammock.
Hammock end – Amsteel loops with whoopie hooks through the sleeve.

Hammock weighs 11oz with the Amsteel loops and whoopie hooks.

Tree straps 5' long 5/8" mule tape with a 8" long amsteel leader with another whoopie hook on the end of the leader and a 4.5' long amsteel whoopie on the other end.

Suspension weighs 3.4 oz.

Similar to a Sgt rock UL suspension if I remember correctly but slightly modified.

Its comfortable but I dont think it is quite as comfortable as my double 1.1 digital camo hammock just talking breathability, but I have not tried them back to back. My double 1.1 has no DWR treatment.

A tiny bit stretchy but not too much but need more time in it as I just finished it.

Entire rig weighs 14.4 oz.

Troy Ammons BPL Member
PostedMar 14, 2015 at 8:43 pm

Yeah I will have to work on that – LOL.
Where I am right now, not any good places for a photo op.

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...