Sorry – Too long.
I have made a few climashield quilts and these are my suggestion and consider that I made one M90 quilt that was too narrow for the way I sleep trying to save a few oz and had to junk it.
Dont make it too small just to save an oz the first time around.
You can always cut it down later but its too much hassle to make bigger.
IE for instance a half taper quilt your size the difference in weight of a quilt that is 48" wide and 54" wide is only .8 oz total but if you are a flip flopper or have a thick pad that extra 6" in width may work much better at keeping you warm
Make it as tall as you are less the footbox so that would be 5'-4" long unless someone taller will be using it.
If its a round sewn in footbox then that length is it.
If a gathered end footbox then add the length you need for the desired diameter of the footbox or about 7-8" with seam.
If you sleep in a hammock on your back or like you are in a coffin and dont have a thick pad then it can be made less wide.
If you move around a lot or are a side sleeper that scrunches up and sticks your but and knees out or you want to stick your pad end inside the foot box then you need it wider.
My width rule that really works for me and is comfortable is put your arms down by your sides measure the circumference then add 4" – 6". That gives me plenty of width but I am big so my width is 60"-62". Seems like I got that from Tim M.
I like a half taper or a coffin shape. IE rectangle at the top to about half way down and then tapered to the foot. You dont need full width at the neck so you can clip the corners a bit at the top if you want but not too much.
Make a pattern and make sure its big enough before you start cutting.
Pin the pattern to the cloth and insulation to cut. Use some good sharp sissors and make sure you dont double up your fabric and make a bad cut on the layout or while sewing an cutting thread. I have done both and its a real pisser to cut somewhere you dont want to.
5'-4" ~ 128lbs – Just as a guess your length should be 5'-4" plus a 11" diameter footbox if sewn in which is sort of a pain but nice. Width for you should probably be around 52" or so and made from Argon at .67 oz per SY, I did a quick layout in cad and came up with 10.8 oz.
Hint make the length of the body at the foot slightly longer than the circumference of the foot circle. For some reason I always need a little more.
Of and add whatever you need for a seam at all edges.
Most quilts are going to be between 2.5 square yards for a very small one up to my size which is 3.1 SY.
Yours I figure will be about 2.7 SY, so (2.5+6.7+6.7) * 2.7 = 10.37 then add half an oz for misc drawcord etc.
Also you only need to edge sew climashield.
I think dridown is more comfortable than climashield but climashield is a no brainer for a first quilt especially if you make a flat quilt.
I just read that you have a EE quilt so you should know what size will work.
The CLO calc I use is below. I got it here a long time ago. Its fairly close but I think it needs to be 5dF more conservative. With 2.5 apaex the calc comes out to about 44dF +5 by my thinking so 49dF.
Avg temp rating = 60-(clo * total clo * 10) then I add 5dF.
This is how I do it for one with a footbox.
Make a pattern of heavy paper.
Cut the materials
Find the right side out sides.
Sew together the entire outer shell. Make sure the right side is out
Then sew the inner round insulation piece to the round piece of inner fabric.
Sew the large piece insulation to the inner large piece of fabric.
Sew the complete foot end to the end of the complete main body and close up the bottom edge however far you want to go up.
Make a channel for the top for a drawsting and make the drawstring with toggle and assemble.
If you want side pad ties make those from grosgrain.
Make the V if you want that.
Turn everything outside in and pin it all together and go to town sewing it together. Leave about a 16" opening down the side to close it up.
Flip it inside out and check for runovers or where you stitched that wasnt supposed to be. If you are careful you wont have any.
You can go around the edges on the outside later if you want to.
To me getting that damn V in is the biggest PIA.