Topic

Pack Prototypes

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
PostedFeb 27, 2015 at 3:28 pm

Getting ready for production on a pack design.

Here are two versions of a very similar bag.

Black one is Xpac X21(main Body) and X51(Bottom reinforcement) D40 Diamond reinforcement and snaps for the roll-top closure.

Green one is 150D Cuben Hybrid bottom and back reinforcement, with 50D Cuben Hybrid main body. Velcro for the roll-top closure.

Both have removable top compression and roll-top closures that can attach to side points with tri-glides and removable webbing.

Black 3/4" Nylon Herringbone webbing with ITW Nexus Apex buckles

Cuben version demonstrating straps removed.

Xpac Version demonstrating straps attached.

Green also has additional tri-glides for extra lashing options.

Both are fully seam taped

Cuben Version without straps as shown: 8.9oz @ approx 27 Liters

Xpac Version with all straps is 11.9oz @ approx 32 Literspackss1packss2packss3packss4packss5packss6

James Cahill BPL Member
PostedFeb 28, 2015 at 9:45 am

Nice! What will the level of customization be? Would you make a pack from all VX-51 or VX-42?

PostedFeb 28, 2015 at 1:28 pm

Roger Caffin Suggested that this thread be moved to gear deals, so I will repost there and speak to customization.

Cheers!


Thanks Nathan
Cheers
Roger

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...