1.Khufu Sil $175:

Alpine Green, 30D ripstop silylon. 470 grams/16.58 ounces. Purchased new directly from Locus Gear in April 2019. Seam sealed by me using the TarpTent method. Used approximately 25 nights, but still looks new. No damage whatsoever. LineLocs hold tight and the zippers run smooth.

  • YKK AquaGuard water repellent zipper
  • Catenary curved ridge lines.
  • One upper vent with bug-net and open style cover.
  • 9 ground-level tie-outs in the perimeter with Linelocs to adjust Dyneema reflective guylines easily. *Steak down 2 of the front together.
  • 4 tie-outs in the surface of the panels and 4 tie-outs on each ridge line with DyneemaX and shock cords. *1.6mx4 Β and 2m x 4 of Dyneema reflective guyline attached.
  • The zipper in the front panel with shock cords and toggles for roll open.

Manufacturer’s page: https://locusgear.com/items/khufu-sil/?lang=en

2. Khufu 2/3 mesh inner $120:

30D silnylon bathtub floor in black. 0.7oz ultra light black No-see-um mesh. 340 grams/11.9 ounces. Purchased new from Locus Gear at the same time as the Khufu Sil. Used approximately 20 nights, but still in great condition. No damage whatsoever. No rips, tears, holes, etc. to the floor or mesh. Zippers run smooth. Only sign of use are superficial “scuffs” on the bottom of the floor.

  • Catenary curved ridge lines.
  • 4ground level tieouts in the perimeter with Linelocs to adjust Dyneema reflective guylines easily.
  • L shaped front zipper with shock cords and a toggle for roll open.

Manufacturer’s page: https://locusgear.com/items/khufu-23-mesh/?lang=en

3. Khufu HB full mesh inner $130:

Purchased used from BPL Gear Swap a few weeks ago. No use by me. Looks to be in good condition with no damage.

Size : L 230cm x W 135cm x H 130cm (β‰ˆ L 90.55β€³ x W 53.15β€³ H 51.18β€³)

Weight : 360g (β‰ˆ12.70oz) (incl. Stuff Sack)

Upper : No-See-Um Mesh, Color：Black

Bathtub Floor : 10D Silicone / PU HyBrid coating Ripstop Nylon,

Color : Tan

  • Features
    • Inverted T Zipper with door catches on each side of the front panel
    • Catenary Curved ridge lines
    • 4 corner tie-outs with Dyneema Reflective Guy-lines and Line-Locks pre-attached
    • Center of floor of pole contact point reinforced
    • Seam taped on the floor

Manufacture’s page: https://locusgear.com/items/khufu-hb/?lang=en

Payment via PayPal F&F preferred. Shipping to CONUS is $8 per item or $10 for 2+. I’d prefer to sell the Khufu Sil and 2/3 mesh inner together. I’m having difficulty adding additional photos, but I’ll try to update with more soon. I can email more upon request. Thank you.