Modified Toaks 550 "Light" Titanium pot With and W/O handles Kits/Bundles

[DAN-Y]

I’m offering these kits again due to increased interest in them. Lots of emails asking for them.

This is a sign-up sheet for those who want a kit.

Modified Toaks 550 Titanium pot with handles and with out. (Same Price)

Titanium Caldera Cone

“Improved” Modified Starlyte for Cone  (for confined space)

Brian Green Esbit Tray with no leak bread pan corners

Mesh Stuff sack

Pot with lid weighs 69 gr – 2.4oz   (lid weighs 16gr – 0.5oz)

Starlyte Burner with lid 16gr – 0.5oz

BGET with alum. storage container 10gr – 0.4oz

Caldera Cone with sleeve 17gr –  0.6oz

Mesh Storage Sack 11gr – 0.4oz

Price:  $97.50 (includes shipping).

I’ll let this sign-up sheet run for 2 weeks and then order pots and cones.

 

[Greg Cullison]

Dan,

I’ll take a kit with pot handles please.

Thanks, Greg

[Shawn Peyton]

Put me in for one without handles. Thanks Dan, appreciate you offering these again.

[Matthew / BPL]

Dan, I’d like a pot with handles but no kit. Just the pot with the rolled edge to go with my existing kit from the first round. Can I do that?

 

PS the rest of you should all get one of these because it is the bomb dot com. Just sayin.

[Christopher *]

Hey Dan,

I thought you were campground hosting for the winter?

Are you still going to do a larger pot eventually? I really like the looks of this kit, but I was holding out for a bigger size.

[David Colbert]

I’d like a kit with handles please.

Thank you Dan!

[DAN-Y]

Matthew…. I can do that.

Christopher *…..I am doing the hosting. the section of the campground where I’m located closed for the season at the end of October so now all we have to do is be “visible” one week on, one week off, which gives us time to go further south to find some warmer camping conditions. I brought my tools and supplies with me to keep me busy with stove stuff. I’m going to offer the Toaks Light 650 with TD Cone and then a Toaks 900 with my straight wall windscreen/potsupport used with Esbit only due to storage of the support in the vertical position for max storage room for other goodies.</div>

[Christopher *]

Hey thanks for the reply Dan.

The 900 is what I was hoping for, but I didn’t realize the ESBIT only restriction. I thought I had seen a starlyte with that welded straight-walked setup when you pictured it here. If it is ESBIT only I’ll sign on for the 650.

[DAN-Y]

Christopher, I’m going to do 2 versions of the 900 kit. The support for alcohol version will be taller and have to be stored horizontal.

[Marty Cochran]

Dan

I would like the 550 kit with handles. Thanks for pulling all of the pieces together in one place.

marty

 

[David Colbert]

Dan.

If you don’t object, I think I’d prefer the 650 kit vs the 550 kit.

Let me know if you would like me to put a reply in that post.

David

[DAN-Y]

David, make a post in the 650 thread.

[Hubert Wieland]

My mistake, I’d like the 550 w/o  handles.

H

[DAN-Y]

I’ll let this sign up sheet continue till December 26, 2016

[DAN-Y]

Got an email with a link to a video:

[DAN-Y]

Dan E. wants a 550 kit 12/27/16

I’ll let the lists be open for one more day.

[DAN-Y]

Totals for the Toaks 550

 

Toaks 550

Greg Cullison kit with pot handles

Christopher * wants 900 pot

Hubert Wieland no handles

Dan E. wants a 550 kit with handles

[Marty Cochran]

Dan

In the 650 list I switched my request to the 650 with handles.

thanks

marty

[DAN-Y]

Ok, took you off the list. :-)

[Christopher *]

Dan,

I signed on for one of the 750 w/o handle kits instead of the 900. Thanks! I’m on both 750 threads, but want just one 750 kit. (Otherwise my wife will kill me in my sleep.)

[DAN-Y]

Toaks Pots and Caldera Cones have been ordered.
When I receive the Toaks pots, I will contact everyone to begin assembly of kits and to get your email address for paypal invoices. A free “low volume” dispense cap that fits yellow bottles of “HEET” will be included with kits.

Thank you to all that have participated in this offer.

A Happy and Healthy New Year to all.

[Nathan Lare]

Dan,

Do you anticipate offering these combo kits (specifically the 550) again in the future?  Do you know if the Trail Designs Gram Cracker esbit stove would work with your kit?

Thanks,

Nathan

[Thomas V]

Dan,

Wow, I missed this one. I would love to be a list for 550 kit if anyone backs out or if any become available.

Thomas

 

 

[DAN-Y]

Yes, I’ll offer them again once I return home in the spring (April) I’m on an extended camping trip :-) where there is no snow and ice. I’ve been catching some really nice sized crappies with my newly acquired Tenkara rod.

[DAN-Y]

Pots and Cones arrived today.

Everyone that signed up has been sent a message to email me concerning their kit. Invoices will be sent once I receive an email response.

Dan

[Author]

Posts