Topic

Mid Dilemma


Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Home Forums Gear Forums Gear (General) Mid Dilemma

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #3819548
    Michael C
    BPL Member

    @mcapocci

    I have a Khufu with 2/3 mesh inner, which worked out pretty nicely on the Cape Wrath Trail this year, with three caveats:

    1. I really can’t stand the silnylon sag.
    2. The weather wasn’t great, and I would like a semi-solid nest
    3. Just a tad longer would be great, but not essential.

    Now, I can solve 1) and possibly 3) with a Duomid in silpoly; BUT no semi-solid nest, unless I source something third-party.

    For 2), LocusGear do a fantastic range, something for every situation, but they only have silnylon for the tarp (I’m not keen on DCF). The also do a Khufu Grande – if they did silpoly I would bite their hand off!

    I could also go to a Pyraomm Duo (Liteway) in silpoly or ultra, but again no semi-solid nest.

    So the options I can figure are:

    1. Grab a Pyraomm Duo, being almost identical in size to the Khufu, and grab a Khufu semi-solid nest. I can also use my existing mesh next with this.
    2. Grab a Duomid and source a 3rd party nest, but since ookworks disappeared I can’t see any.

    Anyone got any ideas?

     

     

    #3819554
    baja bob
    BPL Member

    @bajabob

    Locale: West

    Locus Gear posted on their IG recently that they are making solid inners for their mids.

    Check on AlieExpress. There are solid inserts, but the inserts are a bit on the heavy side relative to what the cottage makers offer.

    #3819558
    Michael C
    BPL Member

    @mcapocci

    Yes, LocusGear do great inners but silnylon tarps.

    #3819566
    Jon Solomon
    BPL Member

    @areality

    Locale: Lyon/Taipei

    Why won’t your LG inner fit inside an MLD Duomid?

    #3819568
    Michael C
    BPL Member

    @mcapocci

    Well, it sort of would, but the Khufi is 130cm tall and 270cm long , and the duomid 140cm and 280cm, though I guess wouldn’t notice that except in some welcome extra separation.

    #3819570
    Jon Solomon
    BPL Member

    @areality

    Locale: Lyon/Taipei

    That will definitely fit fine.

    I don’t know if the current version of the Duomid has a clip inside the peak but older versions didn’t. In the absence of such a clip, it should be easy to rig a way to clip the Khufu inner to the trekking pole that holds the Duomid up. One lazy way to do this would be to order one of the Tarp Pole Cups from MLD (Zpacks have similar) and attach the peak clip on the Khufu inner to the cup or to a cord tied off from the cup as the cup sits atop the pole.

    Here’s a link to the Tarp Pole Cup
    https://mountainlaureldesigns.com/product/tarp-pole-cups/

    #3819571
    Jon Solomon
    BPL Member

    @areality

    Locale: Lyon/Taipei

    BTW, last time I asked, LG was doing solid inners. It’s not an option on the website. You have to write to them to inquire and Yuki will send a pricelist.

    Hope this helps.

    #3820282
    Diane “Piper” Soini
    BPL Member

    @sbhikes

    Locale: Santa Barbara

    How I deal with sag is I set up my pyramid shelter with the pole slanted. Then when there is sag, I just straighten up the pole.

    #3820283
    baja bob
    BPL Member

    @bajabob

    Locale: West
    #3820479
    Jon Solomon
    BPL Member

    @areality

    Locale: Lyon/Taipei

    Just came back here to say that Ron Bell confirms that “all MLD mids have both interior and exterior apex/peak hang loops”.

    Awesome.

    #3820490
    Jerry Adams
    BPL Member

    @retiredjerry

    Locale: Oregon and Washington

    I have an exterior loop on my tent peak.  I should add interior loop(s).  Good idea

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.
Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Loading...