Topic

Vargo Outdoors Jet-Ti


Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Home Forums Commerce Reader Reviews Vargo Outdoors Jet-Ti

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #1221242
    Eric Blumensaadt
    BPL Member

    @danepacker

    Locale: Mojave Desert

    The Jet-Ti is a minimalist canister
    stove similar to the MSR Pocket Rocket and Brunton/Primus Crux, et al. The difference is that the Jet-Ti is made mostly from titanium and therefore is quite strong as well as lighter,at 2.7 oz., than steel models. As with all Vargo titanium products, the quality is outstanding.

    The thing I like best about the Jet-Ti is its total flame control. Also the burner area gives a wider flame pattern than several other similar minimalist canister burners, giving more even heat for your pot. The valve may be the best of any canister burner. The design is simple, robust and very high quality, as its over $60. price would suggest.

    As with any canister-top burner the setup requires an additional 3-leg plastic canister stand for the safety of extra stability, especially with small canisters. I ordered a Primus folding plastic canister stand, which can accomodate either small or regular iso-butane canisters.

    One suggestion for a backup stove in case you guess wrong on your canister fuel supply. (A common problem) Get Backpacking Light's 3-leg titanium folding "wing" stove for ESBIT tabs. and carry a half dozen tabs. This will insure that you always have a means to boil water. Each tab lasts about 8 to 10 minutes, depending on altitude. A light windscreen is a necessity with ESBIT stoves. The reason I suggest this backup arrangement is that ESBIT tabs burn hotter than alcohol and are far lighter and smaller per BTU than alcohol.

Viewing 1 post (of 1 total)
  • The forum ‘Reader Reviews’ is closed to new topics and replies.
Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Loading...