Standards Watch is a monthly column by Rex Sanders that examines important backpacking product standards, interviews key people, and describes how the industry uses, abuses, or ignores tests and standards. It also critiques existing standards and marketing, points out missing standards and tests, and proposes other ideas to improve life for backpacking consumers.

Introduction

 Sleeping bag temperature ratings : Noun introduction icons
Credit: The Noun Project, for all illustrations in this article 

You’ve probably seen sleeping bags advertised as good to “32 degrees” (Fahrenheit) or “0 degrees” (Celsius) and wondered how they came up with that number. Thanks to measurements using the ISO 23537 standard, commonly known as the EN rating, we have a consistent but imperfect way to measure and report those values.

In this column, I’ll review the standard in detail and cover its pros and cons. In a future installment of Standards Watch, we’ll hear from some sleeping bag and quilt designers, and look at how companies use, abuse, or ignore standard temperature ratings.

You should keep in mind a few facts barely discussed in the standard. Sleeping bags or quilts are just one part of a system to keep you warm at night. Other gear includes a warm enough sleeping pad, sleeping clothes, and a shelter. Essential skills include going to bed warm, well-fed, and hydrated in a location protected from the wind. Your sleeping system doesn’t generate warmth – it just traps the heat your body gives off, like a thermos keeping coffee warm. And just because your younger, fitter, and trimmer hiking buddy slept warm in a particular sleeping bag doesn’t mean that you will too.

 Sleeping bag temperature ratings : ISO cover
Part of the cover of the ISO-23537 standard. (c) ISO, 2016.

Overview of the Standard

You will see sleeping bag “EN” ratings or “EN 13537” ratings far more often than “ISO 23537” ratings. “European Norm” 13537 was the first widely used international standard for measuring sleeping bag temperature ratings. In 2016, the International Standards Organization published ISO 23537 to replace that standard and make it more consistent. For consumers, the difference between EN and ISO ratings isn’t relevant. Most backpackers and retailers still refer to the EN rating of a bag, whether it’s measured under ISO or EN.

The standard defines a test procedure, using a calibrated manikin in a climate-controlled room on a well-insulated sleeping pad, for measuring a sleeping bag’s Maximum temperature, Comfort temperature, Limit temperature, and Extreme or Survival temperature. Most bag makers publish just the Limit temperature, or the Comfort temperature, or sometimes both.

ISO 23537 bases the Comfort rating on a “standard woman” who isn’t shivering “in a relaxed posture.” The lower Limit rating is based on a “standard man” who’s “curled up inside the sleeping bag” and not shivering. Regardless of your gender identity, I’ll go into more detail below, and in a later article, help you decide which rating might fit best.

There are a few other ways to measure insulation. R-values in U.S. traditional units come from construction, and are now widely used (for better or worse) to measure sleeping pad insulation. RSI or m2*K/w is the metric equivalent and used throughout ISO 23537. You can measure clothing insulation in international tog units or U.S. clo units, but sleeping bags rarely feature them.

 Sleeping bag temperature ratings : Noun process

Testing Process

Before testing begins, a climate-controlled room is set up to meet the standard. The sleeping bag and manikin lie on an R 4.8 (RSI 0.85) pad, placed on a large-enough, about 3/4 inch (20 mm) thick wooden board. The whole apparatus is at least 3.9 inches (100 mm) above the floor, with air circulation underneath.

Sleeping bag preparations typically start the day before the test, with the bag tumbled for 15 minutes without heat in a large, laundromat-sized dryer. Then the bag goes into the climate-controlled room for at least 12 hours. Yes, even sleeping bags need to acclimate!

The real action starts on the day of the test. The tester lays the sleeping bag on top of the pad and board. If the bag’s hood closes small enough, a cold-weather mask goes onto the manikin’s face. Then the tester places the manikin inside the sleeping bag and completely closes the zippers and hood, if appropriate.

The manikin has both electric heaters and an array of thermometers connected to test equipment. While monitoring the temperatures, the tester slowly increases and measures the electric power heating the manikin. The rarely-seen Maximum temperature test uses a manikin with arms out, no face mask, a flat hood, and an open zipper.

Five pages of mathematical formulas in ISO 23537 can compute sleeping bag insulation in RSI and the four rated temperatures. The equations reflect human heat production; dry, evaporative, and respiratory heat loss; body temperature changes; and sleeping bag breathability. In practice, shortcut formulas and tables in the standard make the job much simpler.

 Sleeping bag temperature ratings : ISO graphic
Example of an ISO 23537 standard compliant sleeping bag graphic label. The temperatures left to right are Maximum, Comfort, Limit, and Extreme. Credit: Rex Sanders

ISO 23537 also requires specific consumer labeling on each sleeping bag, including a graphic based on the four calculated temperatures. Bag makers may be creative if they include all the required elements.

Good Stuff

Testing most sleeping bags to the same standard makes for easier and more trustworthy consumer comparisons. Before standardized testing, you had to rely on the inconsistent temperature or “season” ratings of bag makers. Moreover, some manufacturers had a much better reputation than others.

Despite using a motionless manikin lying on its back, standard developers used extensive human research to calibrate their mathematical models. Also, the standard explicitly allows for testing of hoodless sleeping bags, and by extension, quilts. However, the manikin would lose a lot of heat through its uncovered head, resulting in a more flawed temperature rating.

 Sleeping bag temperature ratings: Noun confusion

Oddities

ISO 23537 has a few quirks. One part of the standard requires testing in a room with a temperature that could range from 41 F to 59 F (5 C to 15 C). A later section specifies calibration using 58.8 F to 59.2 F (14.9 C to 15.1 C). Yet, Amendment 1 requires testing in the same conditions as calibration.

The standard has specific but confusing language describing when tests should include a military-grade extreme cold weather mask. In brief, the tester must put that mask on the manikin for sleeping bags with hoods that can close to less than 4.7 inches (120 mm) across the face. That would barely expose the eyes, nose, and lips. For sleeping bags with larger openings or no hoods, or for quilts, tests must not include a mask. That seems like the opposite of what most people would do.

The standard says it works like this: in cold air, most sleepers turn their face into the cinched-up hood of their sleeping bag. But the available instrumented manikin’s neck can’t rotate. So to simulate a turned head in a closed hood, the standard requires a mask but prohibits it when there’s no suitable head covering.

 Sleeping bag temperature rating: Noun testing

Test Issues

The standard has many limitations that can reduce its accuracy when compared to the real world. For example, all tests use just one manikin that must stand in for humans with a range of heights, widths, weights, and total heat production. This can be a real testing problem for bags much smaller or larger than the manikin. And during testing, the manikin wears a relatively warm long-sleeved top, long underwear, knee socks, and usually a cold weather mask.

The standard developers calibrated the test using numbers from a so-called “standard man,” who was 25 years old, 154 lbs (70 kgs), and 5 ft 8 in (1.73 m). And the so-called “standard woman” was also 25 years but with a height of 5 ft 3 in (1.6 m), 132 lb (60 kg) weight, and 25 years old. The standard also warns that it might not work for children, temperatures below -4 F (-20 C), or sleeping bags with “local extra insulation.”

 Sleeping bag temperature ratings: BPL sleeping bags
Sleeping bags and quilts featured in recent Backpacking Light stories. Credit from top left: Ryan Jordan, Max Neale, and Max Neale.

Sleeping Bag Design Issues

Note that the ISO 23537 test does not cover other features that can affect your warmth. A dummy that never stirs won’t thoroughly test draft-prevention features that can move a little or a lot, like hoods, neck collars, and zipper draft tubes. Real-world tests of bags with identical ratings but different draft-prevention features often discover these differences.

Other design issues can make a sleeping bag feel warmer or colder, including: insulation movement and clumping, especially with down; overstuffing that doesn’t add significant insulation, but can stop shifting and delay decay; compressing insulation, especially down, as you move and extend feet, knees, hips, shoulders, and elbows; and balancing between enough room inside for comfort versus heating more air that escapes when you gyrate. Designs that create cold spots, particularly for hands and feet, can make an otherwise warm sleeping bag feel miserable.

 Sleeping bag temperature ratings: Noun weather

Environmental Issues

A variety of environmental issues can turn any sleeping bag colder or warmer than the controlled environment specified in ISO 23537. Wind through your shelter is very efficient at removing warmth. Low humidity can make a cold night feel colder through skin evaporation. Excess condensation can reduce the insulating power of down. You’re unlikely to stay warm if rain or snow falls on your unprotected sleeping bag. High altitude can lead to more heat loss. But clouds overhead act like another blanket, keeping you warmer.

Unexpected temperature drops through the night, like a cold front moving in or camping at the bottom of a drainage, can refrigerate you. A sloping campsite can make you slip out of your bag, or make you and the bag slide into damp shelter walls. And going to bed early on long winter nights allows more heat loss before the warming rays of dawn.

 Sleeping bag temperature ratings: Noun shivering

Individual Issues

Everyone’s different, and everyone changes. Sleeping bag tests based on a theoretical average human can mismatch your camping experience in many ways; to hijack a common BPL acronym, YMWAV – Your Mileage Will Always Vary. Here are some examples.

Cold, Wet, Tired, Hungry, or Thirsty

If you are suffering from the usual suspects, don’t be surprised if you have trouble sleeping warm enough.

Traditional Gender Differences

In general, women tend to sleep colder than men, often due to smaller bodies and different circulation patterns. And hormone changes can have a significant effect on perceived warmth. And if your gender identity is non-traditional, some of these factors might not apply.

Age

Most people lose some heat-generating muscle mass as they age, so older people often sleep colder than younger people.

Circulation

Some people have better circulation in their feet and hands than others. You won’t be happy if your feet are ice cold, but the rest of your body is warm.

Acclimation

When you fly from your home in coastal Hawaii straight to a winter trek in central Alaska – watch out!

Attitude

If you are convinced that you’ll sleep cold, you will.

Tossing and Turning

Some people rotate and rearrange their bodies throughout the night, pushing out a lot of warm air and pulling in too much cold air.

Health Issues and Medications

If you’re sick, or have chronic health issues, or take traditional or non-traditional medicines, your body can run much colder or warmer than usual.

Personal Thermostat

Some people just run hotter or colder than others.

 Sleeping bag temperature ratings: Noun gear group

Gear Issues

Your gear and its condition can assist or obstruct a comfortable night’s sleep. Some people cuddle with hot water bottles for added warmth. Others keep cold water bottles, electronics, gas canisters, and other stuff in their sleeping bag to prevent freezing. Those items are also heat sinks with only one source of warmth – you!

Your sleep system may have been a faithful companion on many adventures over the last 20 years. But now the insulation has broken down, the foam in your sleeping pad is noticeably thinner, and your long johns have holes with names. Or maybe you’ve borrowed a bag that’s too big or too small. Don’t be surprised if you wake up colder than expected.

Many sleeping bag makers assign the lower Limit temperature to “men’s” and “unisex” bags, and the higher Comfort temperature to “women’s” bags.” If you buy a bag based on the headline number, you could be in for an unpleasant surprise.

 Sleeping bag temperature ratings: Noun push

Pushing Test Limits for Better Ratings

Sleeping bag testers could push certain parameters to the boundaries allowed in the standard to get better temperature ratings. I’ve seen no evidence that this is happening. Yet, pushing limits might be in the best short-term interest of well-funded sleeping bag and quilt makers with their own test equipment.

ISO 23537 calls for a small range of sleeping pad insulation values. The standard also allows for slight variations in the manikin’s clothing insulation, electric heating power measurement, wooden board thickness, air speed in the test room, and other parameters. Pushed in the right direction, small changes like these can add up to measurable differences in ratings – and price.

Conclusion

ISO 23537 isn’t perfect, but all similar standards are flawed, since they substitute laboratory measurements for individual real-world experience. Still, widespread use of the standard was a big leap forward for consumers. Now we can compare sleeping bags between most manufacturers more reliably.

However, we must keep in mind all the other variables that go into sleeping warm in the backcountry. And high-quality gear reviews will continue to play an important role in sleeping bag and quilt selection.

Because as REI emphasized in one blog post:

“A temperature rating is not a guarantee of warmth for any bag.”

About Standards Watch

  • Standards Watch is a monthly column by Rex Sanders that examines important backpacking product standards, interviews key people, and describes how the industry uses, abuses, or ignores tests and standards. It also critiques existing standards and marketing, points out missing standards and tests, and proposes other ideas to improve life for backpacking consumers. Got an idea for Standards Watch? Submit it in the comments below!

More Information on Sleeping Bag Standards

“ISO 23537-1:2016” International Standards Organization

https://www.iso.org/standard/67105.html

The current international standard for measuring and displaying sleeping bag temperature ratings and dimensions, approximately $129.

“ISO 23537-1:2016/AMD 1:2018” International Standards Organization

https://www.iso.org/standard/73657.html

A very short amendment to the 2016 standard, about $18.

“Understanding Sleeping Bag Temperature Ratings” REI

https://www.rei.com/blog/camp/understanding-sleeping-bag-temperature-ratings

A good overview of temperature ratings, with examples of some quirky uses and creative marketing. 

“The Physics of Insulation in Sleeping Bags” Sea-to-Summit

https://seatosummitusa.com/blogs/ask-baz/the-physics-of-insulation-in-sleeping-bags

An unbiased explanation of sleeping bag physics, including design issues not covered by the standard and rarely mentioned elsewhere.

“Sleeping Bag Systems for Adults: Thermal Insulation and Temperature Ratings” Kansas State University

https://www.k-state.edu/ier/testing/2017%20Sleeping%20Bag%20Insulation%20and%20Temp%20Ratings.html

Kansas State is a well-known independent ISO 23537 tester of sleeping bag temperature ratings.

Related Content

More By Rex Sanders

Forum

DISCLOSURE (Updated November 7, 2019)

  • Some (but not all) of the links on this page may be “affiliate” links. If you click on one of these links and visit one of our affiliate partners (usually a retailer site), and subsequently place an order with that retailer, we receive a small commission. These commissions help us provide authors with honoraria, fund our editorial projects, podcasts, instructional webinars, and more, and we appreciate it a lot! Thank you for supporting Backpacking Light!