Topic

glove layering advice


Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Home Forums Gear Forums Gear (General) glove layering advice

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #1217230
    Bob Gabbart
    Member

    @bobg

    I’m looking for a glove to use while snowshoeing this winter. Temps will be 0 – 30 degrees or so. I already have the ID down mitts and possumdown liners for camp use. I’m looking for a pair of gloves to use during the day. I see that OR has quite a line of windstopper gloves. Which one would you recomend? It seems they are mostly the same cut and differ in materials. The 3 I’m looking at are the Talon, Gripper, and AirFoil gloves by OR, but I’m open to other recomendations.

    In weight the AirFoil is 1.9, Talon 2.9, and Gripper is 3.3 oz.

    It looks like the Gripper is made of Windstopper fleece with a gripper palm, while the Talon and AirFoil are made of a stretchwoven Windstopper frabric with a fleece interior. The Talon seems to have the same gripper palm as the Gripper and the AirFoil has something else.

    Anyone have any of these gloves?

    Bob

    #1345875
    larry savage
    Spectator

    @pyeyo

    Locale: pacific northwest

    The problem with frozen water is that it eventually thaws,stuff a pair of windstoppers into a snowbank in some gravity induced debacle and your hands will become wet and then cold and you’ll become testy. I think an overshell mitt with a couple of different liners would work out.Last year I used rei one gloves[a soft shell material] with a little dwr on them. Wind stopper gloves are great as long as you keep them out of the snow. Lobster style mitts for serious cold seem to be popular around here also.Most of the gloves for crosscountry skiing work well with a little treatment on them and on epic trips take a spare pair vacuum bagged.

    #1345881
    Mike Clelland
    Member

    @mikeclelland

    Locale: The Tetons (via Idaho)

    Did you sau you expect temps to -30 ???

    Dang, don’t skimp on gloves!

    Get a SHELL glove with a removable liner. Then Get an EXTRA liner. This is the easiest system, you can be drying one liner (inside your jacket) while the other is in your glove Shell.

    OR makes good gloves, don’t shy away from something heavy and well insulated. THese are your hands, and they are useless if they get too cold.

    The glove shell will NOT be part of your packweight, it’ll be on your HANDS!

    peace,
    M!

    #1345887
    Bob Gabbart
    Member

    @bobg

    I should not have written it that way. I expect temps from 0 to 30, not -30 ;)

    Bob

    #1345889
    Anonymous
    Guest

    It’s been a long time since I’ve seen –30 Fahrenheit. It just doesn’t get that cold in Washington’s Cascades. I do know the secrete to warm hands and feet is a warm head, so I figure you already have a good balaclava and hat system worked out. For hands I like multiple layers with an outside storm shell. Your always going to be taking a break from time to time, taking your pack/snowshoes on/off, eating, or taking pictures. Having a multiple layer glove system makes that much simpler as you will always have a base layer on. But if your talking 0 to –30, windstoppers are not that warm. I defer to others on this site who have more experience in those temps but do agree with Mike C and Larry S, a good (OR) shell with integrated/removable liner as well as your possum downs could be a way to go.

    #1345896
    Bob Gabbart
    Member

    @bobg

    I’m not sure how the above post wasn’t clear, but people seem to still be confused. The confusion came because I wrote 0 to 30 as 0 – 30. That was not intended to be -30. I hope this is clear now ;) We are talking about above 0.

    Thanks!

    Bob

    #1345902
    George Gagesch
    Member

    @coolbreeze-2

    Personally I like to use glove/mit combo by REI while running and riding. http://www.rei.com/online/store/ProductDisplay?storeId=8000&catalogId=40000008000&productId=47942153&parent_category_rn=40001352&vcat=REI_SSHP_MENS_CLOTHING_TOC It allows you to use fingers when needed and vents when too warm. Gives a wide range in temp. They are the best all around hand protection I use. If you like more of a glove feeling, check out some of the biking gloves at Performance. They are designed to grip well. I got these for my wife and she really loves them. http://www.performancebike.com/shop/profile.cfm?SKU=19376&subcategory_ID=1141 I have normal size hands and would buy XL. Not sure what it is about biking, eveything seems to run on the small side.

    #1345909
    Carol Corbridge
    Spectator

    @ccorbridge

    Locale: Southern Oregon

    George, Neither of the links work for me. Can you give me the product names? Thanks

    #1345913
    paul johnson
    Member

    @pj

    Locale: LazyBoy in my Den - miss the forest
    #1346079
    George Gagesch
    Member

    @coolbreeze-2

    Go to http://www.performancebike.com and look up Louis Garneau Ergo Air Vulcano gloves. I saw that the REI one works.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.
Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Loading...