Topic

WONDER JSB STOVE


Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Home Forums Gear Forums Make Your Own Gear WONDER JSB STOVE

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #1258764
    Yukio Yamakawa
    Member

    @jsbjsb

    Locale: Tokyo,JAPAN

    Wonder_jsb_stove

    carbonfelt
    stainless wire
    aluminium pill case

    just 9g only,simple, cheap,
    and make it easy

    http://www.youtube.com/watch?v=kVmKduqX1AQ
    ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    Stainless steel wire, 0.9mm in diameter is.
    Will be red-hot, almost does not change the spring characteristics.
    Also pushed to overlap
    There will be wrapped in a swirl of change in diameter.
    After four minutes from ignition, get a cup of boiling water.
    Carbon felt to collapse
    1 inch wide CF. Right triangle after another collapse.
    Fixed with wire and small squash. Pour the alcohol burn.
    Remove the wire from the slow cooling. Formatting is complete.

    #1608406
    Dan Yeruski
    BPL Member

    @zelph

    Locale: www.bplite.com

    Burns too hot??????

    #1608458
    Javan Dempsey
    Member

    @jdempsey

    Locale: The-Stateless-Society

    How much fuel? Does appear very hot.

    What is wt of carbon felt compared to fiberglass roving, does it wick the same?

    #1608684
    Yukio Yamakawa
    Member

    @jsbjsb

    Locale: Tokyo,JAPAN

    Thank you! This is a new stove, due to the carbon felt.
    1. This stove is just one inch wide carbon felt. @ 2.8mm thickness
    2. Completely separate and rise to function and burn, the best ingredients.
    3. Vaporization of carbon felt performance is three to five times as fiberglass.
    4. Reduces the surface area, just tap the height. Fire can be easily changed.
    5. Carbon felt may be used to grab the pot. Also serves as insulation.
    6. When you sat down, you can expect a warm and cushion effect
    7. You can also use the windscreen.
    8. Once CF is red-hot, and blow out, extends durability.

    Preheating is required at all.
    Reached a steady burning within 2 seconds.

    Rolled carbon felt, bear with wire
    Simply put Esbit stand
    Becomes saturated with a simple alcohol stove.

    Important
    CF surface area to determine the fire.
    CF volume to determine the burning time.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Get the Newsletter

Get our free Handbook and Receive our weekly newsletter to see what's new at Backpacking Light!

Gear Research & Discovery Tools


Loading...